Difference between revisions of "Reprap Visit"
(Created page with "Notes from the reprap visit: =Current State= Machine works mechanically. Firmware needs to be altered to reflect our data with regards to feed volume. Then we can start printi...") |
(Add Background section with overall description and links to e-mail threads. Minor editing.) |
||
Line 1: | Line 1: | ||
− | Notes from the | + | Notes from the RepRap visit: |
− | =Current State= | + | ==Background== |
+ | ===Description=== | ||
+ | Splat Space is working on getting a 3D printer! W00t! The first step is that we are borrowing one from Neil Underwood of [http://fablocker.org/ Fablocker] (the Winston-Salem hackerspace). This came about through a series of discussions that culminated in Alan and Neil talking at the Maker Faire NC 2011 and working out the details. | ||
+ | |||
+ | The specific type of RepRap is a [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel]. | ||
+ | Here's a cool video overview of both 3D printing and Mendel operation: [http://www.youtube.com/watch?v=B3D56IpACME OhmEye's Introduction and Orientation for 3D Printing with the Reprap Prusa Mendel]. | ||
+ | |||
+ | Neil says the Prusa is one of the simplest designs, straightforward to build and maintain, and pretty robust. It's also one of the cheapest in parts and effort to build. For about $400 in parts, we could have one. Once we had one built, we could use it to print parts for more. | ||
+ | |||
+ | The Prusa that Neil loaned to us arrived in not-quite-working condition, although he has used it to successfully print in the past. So the first steps are to get it working. See [[#Current State]] section for the current state of the printer and [[#Day by Day]] section for the details of the debugging effort. | ||
+ | |||
+ | ===Email Threads=== | ||
+ | There have been a few e-mail threads about getting and setting up the RepRap. They are archived on the Splat Space Googlegroup: | ||
+ | |||
+ | : [http://groups.google.com/group/durham-makerspace/browse_frm/thread/e6074b15306f780f/64b2c3a87518f9ba?hl=en_US Prusa Mendel 3d printer for space] | ||
+ | : [http://groups.google.com/group/durham-makerspace/browse_frm/thread/b5938e82138db2bd/71b7bc6c79a8422c?hl=en_US Reprap contest?] | ||
+ | : [http://groups.google.com/group/durham-makerspace/browse_frm/thread/b57de4019cf7673/061e9c127d9653cf?hl=en_US Prusa: The Arrival] | ||
+ | |||
+ | ==Current State== | ||
Machine works mechanically. Firmware needs to be altered to reflect our data with regards to feed volume. Then we can start printing. [[User:Drew|Drew]] 17:31, 11 July 2011 (MDT) | Machine works mechanically. Firmware needs to be altered to reflect our data with regards to feed volume. Then we can start printing. [[User:Drew|Drew]] 17:31, 11 July 2011 (MDT) | ||
− | =Day by Day= | + | ==Day by Day== |
− | == Saturday 9th == | + | === Saturday 9th === |
Team: Alan, Drew, Skippy, and the other Jeff (add yourself as appropriate) | Team: Alan, Drew, Skippy, and the other Jeff (add yourself as appropriate) | ||
− | == Sunday 10th == | + | === Sunday 10th === |
Team: Drew, Skippy, Mike, Lisa | Team: Drew, Skippy, Mike, Lisa | ||
− | == Monday 11th == | + | === Monday 11th === |
Team: Drew | Team: Drew | ||
After an email exchange with Neil today found out that the length fed into the machine is based on a volume calculation done in the firmware. This was not my understanding of the machine's operation. We need to get a copy of the firmware on the machine, update it per on of the following. | After an email exchange with Neil today found out that the length fed into the machine is based on a volume calculation done in the firmware. This was not my understanding of the machine's operation. We need to get a copy of the firmware on the machine, update it per on of the following. | ||
− | * [http://josefprusa.cz/skeinforge-40-volumetric-calibration] (seems to be the clearest) | + | * [http://josefprusa.cz/skeinforge-40-volumetric-calibrationSkeinforge 40+ volumetric calibration] (seems to be the clearest) |
− | * [http://forums.reprap.org/read.php?154,75635] | + | * [http://forums.reprap.org/read.php?154,75635 Skeinforge 40 Changes to Dimension] |
− | * [http://www.mendel-parts.com/new_forum/phpBB3/viewtopic.php?f=37&t=256] | + | * [http://www.mendel-parts.com/new_forum/phpBB3/viewtopic.php?f=37&t=256 Skeinforge 40 setup notes] |
Also there's an IRC channel on freenode, #reprap. I'm told that they're helpful. [[User:Drew|Drew]] 17:31, 11 July 2011 (MDT) | Also there's an IRC channel on freenode, #reprap. I'm told that they're helpful. [[User:Drew|Drew]] 17:31, 11 July 2011 (MDT) | ||
− | == Tuesday 12th == | + | === Tuesday 12th === |
Revision as of 12:49, 12 July 2011
Notes from the RepRap visit:
Contents |
Background
Description
Splat Space is working on getting a 3D printer! W00t! The first step is that we are borrowing one from Neil Underwood of Fablocker (the Winston-Salem hackerspace). This came about through a series of discussions that culminated in Alan and Neil talking at the Maker Faire NC 2011 and working out the details.
The specific type of RepRap is a Prusa Mendel. Here's a cool video overview of both 3D printing and Mendel operation: OhmEye's Introduction and Orientation for 3D Printing with the Reprap Prusa Mendel.
Neil says the Prusa is one of the simplest designs, straightforward to build and maintain, and pretty robust. It's also one of the cheapest in parts and effort to build. For about $400 in parts, we could have one. Once we had one built, we could use it to print parts for more.
The Prusa that Neil loaned to us arrived in not-quite-working condition, although he has used it to successfully print in the past. So the first steps are to get it working. See #Current State section for the current state of the printer and #Day by Day section for the details of the debugging effort.
Email Threads
There have been a few e-mail threads about getting and setting up the RepRap. They are archived on the Splat Space Googlegroup:
Current State
Machine works mechanically. Firmware needs to be altered to reflect our data with regards to feed volume. Then we can start printing. Drew 17:31, 11 July 2011 (MDT)
Day by Day
Saturday 9th
Team: Alan, Drew, Skippy, and the other Jeff (add yourself as appropriate)
Sunday 10th
Team: Drew, Skippy, Mike, Lisa
Monday 11th
Team: Drew
After an email exchange with Neil today found out that the length fed into the machine is based on a volume calculation done in the firmware. This was not my understanding of the machine's operation. We need to get a copy of the firmware on the machine, update it per on of the following.
- 40+ volumetric calibration (seems to be the clearest)
- Skeinforge 40 Changes to Dimension
- Skeinforge 40 setup notes
Also there's an IRC channel on freenode, #reprap. I'm told that they're helpful. Drew 17:31, 11 July 2011 (MDT)