Reprap Visit
From Splatspace
Notes from the reprap visit:
Contents |
Current State
Machine works mechanically. Firmware needs to be altered to reflect our data with regards to feed volume. Then we can start printing. Drew 17:31, 11 July 2011 (MDT)
Day by Day
Saturday 9th
Team: Alan, Drew, Skippy, and the other Jeff (add yourself as appropriate)
Sunday 10th
Team: Drew, Skippy, Mike, Lisa
Monday 11th
Team: Drew
After an email exchange with Neil today found out that the length fed into the machine is based on a volume calculation done in the firmware. This was not my understanding of the machine's operation. We need to get a copy of the firmware on the machine, update it per on of the following.
Also there's an IRC channel on freenode, #reprap. I'm told that they're helpful. Drew 17:31, 11 July 2011 (MDT)