Reprap Visit

From Splatspace
Revision as of 23:31, 11 July 2011 by Drew (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Notes from the reprap visit:


Current State

Machine works mechanically. Firmware needs to be altered to reflect our data with regards to feed volume. Then we can start printing. Drew 17:31, 11 July 2011 (MDT)

Day by Day

Saturday 9th

Team: Alan, Drew, Skippy, and the other Jeff (add yourself as appropriate)

Sunday 10th

Team: Drew, Skippy, Mike, Lisa

Monday 11th

Team: Drew

After an email exchange with Neil today found out that the length fed into the machine is based on a volume calculation done in the firmware. This was not my understanding of the machine's operation. We need to get a copy of the firmware on the machine, update it per on of the following.

Also there's an IRC channel on freenode, #reprap. I'm told that they're helpful. Drew 17:31, 11 July 2011 (MDT)

Tuesday 12th